BDS Suspension 8" Lift Kit 2009 - 2013 Ram 2500 & 2009-2012 Ram 3500 4WD

BDS:632H
Add to cart
  • Description
  • More

Normally ships within 72 hours

Important Kit Notes
  1. Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require 4068.
  2. Rear lift options will not fit dually applications.
  3. If driveline vibration occurs, order either transfer case drop or indexing kit available in optional accessories. NOTE: 122606 transfer case drop kit will only replace the OE bracket #52121938AA
  4. Additional front driveline modification may be required.
  5. 2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed
  6. Will not fit Cab and Chassis models.

This suspension system features 8" progressive Pro-Ride Coil Springs for Diesel models and solid steel upper long arms and thick tubular lower long control arms. The long control arm reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road. All four control arms are greasable for long term performance. This 4-Link long arm lift kit retains the factory triangulation of the arms as well which adds to the stability of the suspension system. A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket is included to properly center the axle under the vehicle. Extended bump stops and sway bar links are included to maintain the OE characteristics. The system includes a transfer case indexing ring and driveshaft spacer for use with stock front and rear driveshafts.

Tire & Wheel Combinations
  • 38" x 14.0" w/17 x 9 and 4.5" back spacing
  • *Trimming may be required*
  • Notes
  • Difficulty Level (easy 1 - 5 complicated): 3
  • Est. Installation: 8 hours