Zone Offroad 4" Suspension Lift Kit for 2015 to 2020 Ford F150 Trucks

Zone Offroad
ZON:F47N
Add to cart
  • Description
  • More

Normally ships within 24 hours

Important Kit Notes

No 4" kit currently available for 2017 to 2019 model years

  1. *Kit images show upgraded Nitro (black) shocks*
  2. Requires frame bracket modification
  3. 18" wheels should be test fit to ensure proper tie rod end clearance. Wheel profiles can vary between manufacturers
  4. Stock 17"/18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60R20 tire
  5. Depending on wheel selection, minor trimming may be required to fit tire
  6. In rare cases models equipped with Auto 4wd may require front driveshaft replacement

Zone Offroad 2015-16 Ford F150 4wd 4" Suspension System. This system includes the same features and benefits of the current 6" system for those looking for the same quality and performance at a lower height. The system is built around 2 heavy duty 1-piece lower control arm crossmembers and massive ductile cast iron steering knuckles. Differential relocation brackets place the front differential for perfect CV angles and still allow for the factory front driveshaft to perform as is should. The 4" of lift is provided by bolt-on strut spacers do not require disassembly of the factory struts to install. New eccentric cam bolts make adjusting the alignment easy, sway bar drops adjust the sway bar to its optimum position and a heavy 1/4" thick differential skid plate protects the underside when off driving off road. In the rear, full 4" cast iron lift blocks with integrated bump stop wings provide enough lift to level the truck nicely. Nitro shocks finish out the installation and provide enough clearance for a maximum sized tire of 35x12.50.

Tire & Wheel Combinations
  • Wheel Size: 18 x 9, Max Tire Size: 35x12.50, Back Spacing: 5 - 5.5″
  • Wheel Size: 20 x 9, Max Tire Size: 35x12.50, Back Spacing: 5 - 5.5″
  • *Trimming may be required*
  • Notes
  • Difficulty Level (easy 1 - 5 complicated): 4
  • Est. Installation: 8-10 hours