BDS Suspension 6" Lift Kit 2003 to 2008 Dodge Ram 2500 / 3500 4WD

BDS Suspension
BDS:265H
Add to cart
  • Description
  • More

Special order, normally ships in 14 to 28 days

Important Kit Notes

  • 1. The rear u-bolts will not fit dually applications.
  • 2. These vehicle were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2" or 4" in diameter.
  • 3. Although unusual, if driveline vibration occurs, order the transfer case drop kit available in the optional accessories section. These transfer case drop kits only work with automatic transmissions.
  • 4. Some 4" rear axles with the dual overload option will require four u-bolts 4068 listed in the accessoires.
  • 5. Depending on the factory transmission mount, some 6" kits may require the transfer case indexing kit if a front driveline vibration persists. See installation instructions for details.

This 6" lift kit includes front Pro-Ride Coil Springs and heavy duty, tubular, upper and lower control arms. The lower arms are longer than stock to rotate the axle for proper alignment. A relocation bracket is used to flatten out the angle of the upper control arm to maintain your factory handling characteristics. All four control arms are greasable for long term performance. A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket properly centers the axle under the vehicle. Extended bump stops and sway bar links maintain the OE characteristics.

Tire & Wheel Combinations
  • 36" x 12.50" w/17 x 9 and 5" back spacing
  • *Trimming may be required*
  • Notes
  • Difficulty Level (easy 1 - 5 complicated): 3
  • Est. Installation: 6-8 hours