2015-2019 Tahoe, Suburban, Yukon 1500 4wd w/ Magneride 6 inch lift

BDS:751H
Add to cart
  • Description
  • More

Normally ships in 7 to 14 days

Important Kit Notes
*Important* GM produced several knuckle/control arm configurations including cast steel, stamped steel and aluminum. Be sure to verify factory control arms before ordering.
Designed for front Magneride equipped models only.
Frame bracket and differential modification required.
20" wheels with 5-5.75" backspacing recommenced to reduce trimming.
AWD models may require front driveline modification.

Tire & Wheel Combinations
33" x 12.50" w/17 x 8 and 4.5" back spacing
34" x 12.50" w/18 x 9 and 5" back spacing
35" x 12.50" w/20 x 9 and 5.75" back spacing
*Trimming may be required*

Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 4

This 6" IFS lift kit offers improved performance over any terrain, improved offroad protection, and enhanced on-road comfort. At the core of this 6" lift system is a pair of 1/4" steel high clearance crossmembers and full width modular differential skid plate to reposition the lower arms and add protection of vital drivetrain components. These combined with the CNC machined ductile iron replacement steering knuckles creates a solid subframe and correct suspension and steering geometry to be compatible with the factory installed ESC system. Differential relocation brackets and CV spacers are used to correct the front axle positioning for stock-like CV axle angles and to retain use of the factory front driveshaft. In place of the stock struts, BDS supplies a pair of high pressure gas struts for improved performance and ride quality. Rounding out the front kit are a pair of replacement tie rod ends, longer sway bar links, brake line brackets, and a front laser cut BDS skid plate.

In the rear a pair of a 5" ProRide coil springs are supplied to lift and level the stance. These offer improve offroad performance and more travel from the rear suspension. To correct the rear suspension geometry with the taller coils installed a pair of heavy duty adjustable upper control arms are supplied along with a track bar relocation bracket and support brace and longer sway bar links. Also included are a pair of bump stop extensions and your choice of BDS- NX2 series gas shocks or FOX 2.0 IFP performance gas shocks. This kit allows for up to 35x12.50 tires to be installed.

This kit is available for all three factory control arm configurations (cast steel, stamped steel, and aluminum) so be sure to verify your factory control arm type before ordering.