Special Order, Not returnable

BDS Suspension 6" Coilover Suspension Lift Kit System for 2009-14 Ford F150 4WD pickup trucks.
BDS Suspension
BDS:1503F
lbs
Add to cart
  • Description
  • More

BDS Suspension Lift Kit

Allow 2 to 6 weeks delivery

Important Kit Notes

  • 2. Requires frame bracket modification and welding.
  • 3. 18" wheels with 5-5.5" total backspacing should be test fir prior to mounting tire to ensure proper clearance to BDS steering knuckle.
  • 4. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
  • 5. E-brake bracket required for factory powersteps (123018) Block kits replace factory 1-1/4" block.
  • 6. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.
  • 7. Models with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122405
  • 9. This kit is FMVSS No.126 Compliant

BDS Suspension 6" Coil-Over Suspension Lift Kit for 2014 Ford F150 4WD.
Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 6" Ford F150 4WD suspension system featuring Fox 2.5" coil-overs. In place of the factory struts this system uses precision tuned FOX 2.5 remote reservoir coil-overs to maximize travel and achieve superior on and offroad performance. The included Fox 2.5 Coil-Overs can also be upgraded to the DSC (dual speed compression) adjuster equipped coil-overs (more info below) for the ability to perfectly fine tune the ride quality and handling of your Fox coil-overs.

This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance. A 1/4" thick steel differential skid plate is included to ensure off road protection.

Out back Fox 2.0 shocks keep things under control and the rear lift is achieved with a new 5" block which includes a new offset spring plate to center the rear axle to give your 37's plenty of room.

 

FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology

The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits.

- LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride.

- HSC Adjustment Range - The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads.

 

Tire & Wheel Combinations
37" x 12.50" w/18 x 9 and 5" back spacing
35" x 12.50" w/18 x 9 and 5" back spacing
20 x 9 w/37x12.50 and 5-5.5" back spacing
*Trimming may be required*

Est. Installation: 8-10 hours
Difficulty Level (easy 1 - 5 complicated): 4