BDS Suspension 6" Lift Kit 2011 to 2019 Silverado 2500/3500 & Sierra 2500/3500

BDS Suspension
Add to cart
  • Description
  • More

Normally ships within 2 business days

Important Kit Notes
  1. 3" block - Will result in a slightly tail-low stance.
  2. 5" block - Will result in a level to slightly tail high stance, integrates a u-bolt flip kit with new spring plate.
  3. Torsion Bar Tool required to load/unload the torsion bars.
  4. 3" rear block kit recommended for dually applications, 5" rear block kit will not fit dually applications.
  5. Stock 17" & 18" wheels cannot be reinstalled.
  6. Stock 20" wheels cannot be reinstalled on 2015-2018 models
  7. Factory dually wheels cannot be reinstalled.
  8. Models with two piece rear driveshaft require an extra part. Be sure to choose the "Yes" option.
  9. If minor front driveline vibration occurs at highway speeds while in 4wd and the vehicle will be used in this situation on a regular basis, we recommend replacing the front driveshaft with a dual Cardan style driveshaft.

This 6-1/2" lift kit utilizes high arched crossmembers that blend perfectly with the angle of the factory installed lower control arms for a completely integrated look while lifting your vehicle a full 6-1/2"dramatically increasing ground clearance at the front crossmembers and improving operating geometry. Torsion bars are mounted directly to the top of the lower a-arm eliminating the need to drop the torsion bar crossmember. A front skid plate and differential skid plate come standard to lock everything together, creating a nearly indestructible sub frame for extreme off road protection.

Tire & Wheel Combinations
  • 37" x 12.50" w/17 x 8 and 4-1/2" to 4-5/8" back spacing
  • 37" x 12.50" w/18 x 9 and 4-1/2 to 4-5/8" back spacing
  • 37" x 12.50" w/20 x 9 and 5" - 6" back spacing
  • *Trimming may be required*
  • Notes
  • Difficulty Level (easy 1 - 5 complicated): 4
  • Est. Installation: 8-10 hours