BDS Suspension 4.5" SuspensionLift Kit 2001 to 2010 Chevy & GMC 2500/3500 series 4wd

BDS:192H
Add to cart
  • Description
  • More

Normally ships within 24 hours

Important Kit Notes
  1. Torsion Bar tool required to load/unload the torsion bars.
  2. Some welding required.
  3. Requires frame bracket modification and differential mount modification.
  4. Traction bars will not fit standard cab/short box models and are designed to work on vehicles with 4" to 8" of lift.
  5. 20" wheels with 5" to 5-3/4" backspacing recommended to reduce trimming.
  6. Gas models require exhaust modification.
  7. Narrow track knuckle will slightly increase turning radius.

This unique High Clearance suspension lift kit utilizes high arched crossmembers that blend perfectly with the angle of the factory installed lower control arms for a completely integrated look while lifting your vehicle a full 4-1/2" dramatically increasing ground clearance at the front crossmembers and improving operating geometry. A front differential skid plate comes standard, for increased off road protection. The rear is lifted with a tapered 3" block for easy installation. This highly customizable kit gives you the choices you need to build your rig your way. Standard or narrow track knuckle kits, gas shocks, and dual steering stabilizers are just a few of the options and upgrades available for this 4-1/2" Chevy/GMC suspension lift kit.

Tire & Wheel Combinations
  • 2001-2007 Classic Body Style
  • 33" x 12.50" w/16 x 8 and 4-1/2" back spacing
  • 35" x 12.50" w/17 or 18 x 9 and 5.5" back spacing
  • 2007-2010 New Body Style
  • 33" x 12.50" w/16 x 8 and 4-1/2" back spacing
  • 33" x 12.50" w/17 or 18 x 9 and 5.5" back spacing
  • 33" x 12.50" w/20 x 9 and 5.75" back spacing
  • *Trimming may be required*
  • Notes
  • Difficulty Level (easy 1 - 5 complicated): 4
  • Est. Installation: 8-10 hours