Special Order, Not returnable

BDS Suspension 8 inch Long Arm Kit 2003 to 2008 Dodge Ram 2500 / 3500 4WD

BDS Suspension
BDS:653H
lbs
Add to cart
  • Description
  • More

BDS Suspension Lift Kit

Allow 2 to 6 weeks delivery

Important Kit Notes

  • 1. This system is designed for diesel applications, but will work on gas models with 6" coils and 2" coil spacers.
  • 2. Rear U-bolts will not fit dually applications.
  • 3. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2" or 4" in diameter.
  • 4. May require additional driveline modification.
  • 5. 2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed

This 8" lift kit includes progressive rate, front Pro-Ride Coil Springs and heavy duty, long upper and lower control arms. The long arm lift kit includes solid upper long arms and tubular lowers to reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road. This 4-Link long arm system retains the factory triangulation of the arms as well which adds to the stability of the suspension system. What does this mean ? Basically it drives great both on and off road. All four control arms are greasable for long term performance. A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket properly centers the axle under the vehicle. Extended bump stops and sway bar links maintain the OE characteristics.

Tire & Wheel Combinations
  • 38" x 14.0" w/17 x 9 and 4.5" back spacing
  • *Trimming may be required*
  • Notes
  • Difficulty Level (easy 1 - 5 complicated): 3
  • Est. Installation: 8 hours