Stocking item, 30 day return policy applies

2019-24 Ram 2500 Diesel w/rear coils 6 inch Radius Arm lift kit

BDS Suspension
BDS:1680H
lbs
    Delivery time:Normally ships within 48 hours
Add to cart
  • Description
  • More

Radius Arm Replacement Lift kit

Important Kit Notes

  • 1. Will NOT fit air-ride equipped models
  • 2. Diesel models only

BDS takes the 2019+ RAM 2500 4WD Diesel Trucks to the next level with this 6" Radius Arm System.
Designed to improve the looks and performance of your new RAM 2500, these kits include everything necessary to correctly lift them for improved offroad capability with room for larger tires while maintaining on-road handling. These systems use front and rear progressive rate coil springs to lift and level the stance, forged drop pitman arm to correct steering angles along with HD track bar drop brackets to re-center the axles. Sway bars and bump stops are repositioned for proper functionality and front suspension geometry is corrected via a pair of high strength boxed radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance at each corner of the vehicle.

At 6" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS provides a heavy duty replacement adjustable transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines.

Get the look and the ride you are after with these new 6" radius arm systems from BDS.


Tire & Wheel Combinations
37x13.50 w/20x9 and 5.625" back spacing
37x12.50 w/20x9 and 4.5-5.625" back spacing
37x13.50 w/18x9 and 5.625" back spacing
*Trimming may be required*

Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 3