Special order, Not returnable

BDS Suspension 6" Suspension Lift Kit System for 2009-14 Ford F150 4WD pickup trucks.
BDS Suspension
BDS:1503H
lbs
    Delivery time:Allow 2 to 4 weeks delivery
Add to cart
  • Description
  • More

BDS Suspension Lift Kit

Important Kit Notes

  • 3. Requires frame bracket modification and welding.
  • 4. 18" wheels with 5-5.5" total backspacing should be test fir prior to mounting tire to ensure proper clearance to BDS steering knuckle.
  • 5. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
  • 6. E-brake bracket required for factory powersteps (123018) Block kits replace factory 1-1/4" block.
  • 7. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.
  • 8. Models with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122405
  • 9. This kit is FMVSS No.126 Compliant

BDS Suspension 6" Suspension Lift Kit System for 2014 Ford F150 4WD pickup trucks.
View Four Wheeler installation article
This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance. A 1/4" thick steel differential skid plate is included to ensure off road protection. The new strut spacers for the front offer easier installation without the need to disassemble the struts and maintain the OE ride quality.

The rear is lifted with a new block and includes a new offset spring plate to center the rear axle and give your 37's plenty of room.

Tire & Wheel Combinations
37" x 12.50" w/18 x 9 and 5" back spacing
35" x 12.50" w/18 x 9 and 5" back spacing
20 x 9 w/37x12.50 and 5-5.5" back spacing
*Trimming may be required*

Est. Installation: 8-10 hours
Difficulty Level (easy 1 - 5 complicated): 4