BDS Suspension 8 inch Lift Kit 1999 to 2004 Ford F250/F350 4WD

Important Kit Notes

• 1. These truck were manufactured with two different style front u-bolts. You will need to know if your front leaf spring u-bolts are square or are half way between round and square with a gentle radius around the OE cast u-bolt plate before ordering.
• 2. Vehicles produced before 3/1/99 require a different box kit. You must check the production date on the door prior to ordering.
• 3. The Superduty came from the factory with a 2", 3", or 4" rear block. If you wish to truly level your vehicle it may be necessary to change the rear OE block.
• 4. Will not fit dually applications.
• 5. If your vehicle is equipped with a carrier bearing, you will want the 123406 drop kit in the options section.
• 6. The front and rear driveshaft will need to be lengthened and or modified to eliminate any drive-line vibrations.