Special order, Not returnable

2013-18 Ram 3500 Diesel w/rear air 6in standard lift kit

BDS Suspension
BDS:1647H
lbs
    Delivery time:Allow 2 to 4 weeks delivery
Add to cart
  • Description
  • More

Radius Arm Drop Lift Kit

Important Kit Notes

  • Kits come standard with 6-Bolt indexing ring kit. If equipped with heavy-duty 8-bolt t-case order 122813 in place of 122623
  • The carrier bearing drop (122405) is necessary for models equipped with two piece rear drive shaft.
  • Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
  • Will NOT fit cab and chassis models
  • The shocks used in these kits are different than a standard 3500, do not use a different shock length or damage to the air bag will result.
  • Can be used on SRW or DRW models, DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits

BDS Suspension is now shipping suspension lifts and accessories for the rear air ride equipped RAM 3500 4WD trucks.
These standard kits are designed to retain the factory radius arms by relocating the frame mounting location using a pair of 1/4" steel drop brackets to maintain suspension geometry. The drop brackets key off the factory mounts and tie into the frame for extra strength. Also included in the kit are specially designed 6" diesel engine specific progressive rate ProRide front coil springs offering improved performance across all terrains. Also included is a heavy duty front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar correction, high clearance transmission crossmember and transfer case indexing ring, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. All kits are finished off with your choice of BDS NX2 or FOX 2.0 gas shocks at all 4 corners. These kits allow for up to 37" tires to be installed.

Tire & Wheel Combinations
37x13.50 w/17x9/18x9/20x9 and 5.625" back spacing
37x12.50 w/17x9/18x9/20x9 and 4.5" back spacing
*Trimming may be required*

Est. Installation: 6-7 hours
Difficulty Level (easy 1 - 5 complicated): 3